3P Semi Auto PET Water Tank Blow Moulding Machine PMMA 50ML

• A single-stage process gains its name from the fact that it creats preforms, stretches, and blow them on the same machine before cooling. It achieves all processing from resin to bottles done in one machine.
• Full automatic production and no flash or trimmings.
• No secondary heating needed and energy saved by at leat 50%.
• Multicavity, high output and smooth bottle neck.
• Mass produce bottles free of contamination defects. Well fulfill the hygienic requirement for food grade containers.
• Fixed orientation: Because the preform is held constantly during the entire molding process, the neck finish is oriented
  to body of the bottle. This is especially beneficial for bottles using a dispensing closure and requiring an oriented
  neck finish.
• High precision in bottle neck and screw, best seaming with almost invisible parting line.
• Final containers are of glossy surface, uniform wall thickness and rigidity.
• Modular design so only need to change the molds to make bottles of different shape or style.
• Advanced and accurate PID temperature control system.
• Hot runner with valve gate type is also available for higher preform gate finishing and wider processing window.
• Can use recycling material and combined with the optimized and improved procedures, it achieves the best efficiency and cost.

• Equipment parameters and process are set by HMI for living supervision of the equipment operation and its matching up with the panel switches and buttons, enables convenient, direct and highly efficient operation of the whole system.

Data Sheet of JASU Injection Stretch Blow Molding Machine (ISBM machine)

One step injection stretch blow molding machine is widely used for various plastic materials and has broad application prospects.

• Application

Cosmetics, PET Can, PET jar, pharmaceuticals, infusion bottles, detergent, mouth wash, mineral water, baby feeding bottles, spice, salad dressing, food, liquor, industrial containers (e.g. photocopy toner container) etc.

• Raw Materials / Resins / Plastic Granules

PET, PC, TRITAN (BPA Free), PCTG, PETG, PMMA, PS, PP etc.

• Shapes

Wide-mouth, oval, ultra-light, plain round, non-round, thick-wall etc.

Guangzhou JASU Precision Machinery Co., LTD is the first PET Bottle Machine Manufacturers of Single Stage PET Blowing Machine

Absorbed the advanced technology from Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D center.
Obtained a number of technical patents.
Overseas sales increase 33% annually.

Market network throughout the country , and export to many countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Service technicians (holding visa and passport) are on call and able to serve on site and instruct via voice and videos.

Question & Answer

Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer in the line of injection blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong Province, China, about 48 minutes by high-speed railway from Hong Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both parties' discussion) and settle the balance payment prior to delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed a good reputation among customers from Europe, Russia, Southeast Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey, Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India, Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa, Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always attach great importance to quality controlling from the very beginning to the very end. Our factory has passed ISO and CE certification. Patents and many other certificates obtained also tells this.
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty. During this period, if you need any support on installation, adjustment , operation or maintenance, our engineers can go abroad to fix for you.
Q7: Others?
A7: We will request the working voltage and power frequency at the buyer's side upon placing the order.

1. Each order will be fulfilled as a turn key project of machine.
2. We will check and test the machine and send the video to the customer for reference prior the delivery.
3. Attache/send an operational manual in English version with the shipment.
4. To use the machine only need to connect power and connect to the air supply and water supply according to the manual or video instructions if requested.
5. Service technicians are on call to instruct via voice and videos. They all hold visa and passport and be able to serve on site.